[Meet panel M+K] SIP webserver
Written by Tecnico Internacional
Updated at November 18th, 2026
Configuration for smartphone call divert, using FERMAX MEET ME APP
ENABLE SIP: Select this box to enable SIP functions.
- SEARCH SIP STATUS: this button appears when enable SIP function, show SIP REGISTERED if the panel register successfully or SIP REGISTER FAILED if the panel register unsuccessfully.
SIP SERVER: Use the FERMAX MEET server -> sip: sip.fermax.com.
DOMAIN: Indicate the server domain -> sip.fermax.com.
OUTBOUND: Not necessary. Leave it in blank.
STUN IP: Not necessary. Leave it in blank.
STUN PORT: Not necessary. Leave it in blank.
H.264: Leave the default value: 102
TRANSPORT: UDP, TCP, TLS options. Default UDP, the No. port of UDP is 5060, the default port is 5060 if no port at the back sip:sip.fermax.com, the No. port of UDP is 5223, the No. port of TLS is 4443
The panel will reboot when the transport is be changed.
SIP USER, SIP PASSWORD: Indicate the user and password of the FERMAX MEET ME licence assigned to this panel. They are indicated in a label attached in the front of the panel.
CONVERSATION, RING TIME: No function.
Configuration for SIP server integration
Configure the SIP parameters as explained below, for the cases where the panel works as an extension of a SIP server
Contact with the SIP server administrator to get some of the information required in this section.
ENABLE SIP: Select this box to enable SIP functions.
SEARCH SIP STATUS: this button appears when enable SIP function, show SIP REGISTERED if the panel register successfully or SIP REGISTER FAILED if the panel register unsuccessfully.
SIP SERVER: Indicate the sip SERVER address. Format -> sip: IP_SERVER.
DOMAIN: domain of the SIP server or IP address
OUTBOUND: Not necessary. Leave it in blank.
STUN IP: domain of the SIP server.
STUN PORT: Used for the configuration of Internet SIP server-based installations. It is usually port 5060. Check with your network or SIP server administrator.
H.264: Depends on the SIP SERVER. In the case of doubt, leave the default value (102).
TRANSPORT: UDP, TCP, TLS options. Default UDP, the port need match with port of sip server,
The panel will reboot when the transport is be changed.
SIP USER, SIP PASSWORD: Indicate the user and password that this terminal is programmed in the SIP server.
CONVERSATION, RING TIME: No function.
Download Article

